Remote mount TPS mount block for someone wanting to put an EFI system on their Enderle Bugcatcher, it also features a progressive linkage to make your motor more streetable in lower rpm cruising. It can also be used without the TPS sensor now if you have a system and want to update later to EFI.

 I use Stainless Steel sealed ball bearings instead of open roller (needle) bearings because ball bearings are smoother in operation and have a longer service life, I also use Stainless Bolts for all my hardware, I don't like the rusty look.

Watch the video link at the bottom for more information

 Note that this is the mount block only and does not include the TPS sensor, for this application it takes a 1989 Cadillac Eldorado TPS Sensor GM part # 17110352 available through GM or your local auto parts store. This TPS sensor should plug into most aftermarket EFI systems.